CoolerSave - Refrigeration Management
Saving money on refrigeration and environmental cooling in the licensed trade
CoolerSave installed in a bar
Keeping bottled beer and soft drinks cool in pubs, clubs and similar venues is a must; primarily because it tastes better that way. The cost of running these bottle coolers 24 hours a day 365 days a year costs an enormous amount of money and has been largely overlooked during the recent efforts to save energy and reduce our Carbon Footprint.
Our research has shown that keeping bottled beer cool is, for much of the time, unnecessary. This leads to hundreds of millions of pounds being wasted and countless tonnes of CO2 being dumped in to the atmosphere.
The quality and shelf-life of bottled beer is totally unaffected by temperature changes so therefore switching the bottle coolers off when not required is not detrimental to the product in any way.
CoolerSave will save £100 - £150 per bottle cooler per year
CoolerSave - designed & built for the job
Developed in conjunction with licensed trade professionals who were concerned about the rising cost of keeping bottled beer cool. CoolerSave has been designed to significantly reduce electricity consumption in bars. The equipment is guaranteed to save money from day one and payback in less than one year is easily achievable. In most cases, the investment is returned in no more than a few months.
CoolerSave has been proven to save around £100 - £150 for every bottle cooler you have in your bar and often much more than this. So if you have 3 coolers you can expect savings of over £400 in the first year and again and again, year after year. As the price of electricity increases, so do your savings.
CoolerSave - your most reliable, cost effective manager
CoolerSave works by simply switching the bottle coolers off when they are not required and switching them back on at the correct time to ensure that the beers are at a temperature which is acceptable to your customers. Obviously, you could do this yourself without CoolerSave. It is quite possible for you to just unplug your coolers at the end of the shift and plug them in again before the next shift, however, our experience proves that you wont! You will sometimes forget to unplug them and sometimes you will forget to plug them in at the correct time. Eventually you will stop bothering. If you employ staff to do it, that will cost you money.
CoolerSave never forgets and so your savings are maximised at all times making CoolerSave the most reliable, cost effective manger you will ever have.
Simple DIY Intallation and operation
The kit doesn’t require an electrican or any special skills for installation. The installation is DIY and requires no tools. Once intalled, the savings start imediatley and you can almost forget the device is in operation.
No brainer of the 21st Century
Extensive laboratory tests by Liverpool John Moores University have proven that CoolerSave works. The result of the tests proved that there was no effect on the quality or temperature of the product at the time of sale to customers. The full report can be downloaded here.
With electricity prices almost certainly set to increase in the coming years, the installation of CoolerSave is a ‘no brainer’.
Which CoolerSave do you need?
There are three versions of CoolerSave. All versions have the same controls and all are fitted with a light to indicate normal operation and an audible alarm should the system fail. Once fitted, CoolerSave can be left to get on with its job of saving money, however should the need arise to temporally change the settings, all CoolerSave versions are fitted with a simple one-touch manual override.
Extensive research at Liverpool John Moore - 2007
CoolerSave 1 designed for use on one bottle cooler or similar appliance and will take only a few minutes to install and set up. Once installed, savings start immediately.
CoolerSave 3 for use with up to three bottle coolers. Again, the CoolerSave 3 is a DIY installation and is able to sequence up to three coolers using the one controller.
CoolerSave Maxi is intended for use in large establishments and can control up 15 bottle coolers in one section. The Maxi requires installation by a qualified electrician. Further information is available up on request.
Guaranteed savings
CoolerSave is guaranteed to save money. You will see from the various charts in the LJMU report how these savings are calculated.
Warranty
CoolerSave 1 and 3 come complete with a full 1 year ‘return to base’ warranty which covers all parts and labour. CoolerSave Maxi is guaranteed for 2 years from date of purchase and of course, all parts and labour are covered. Full terms and conditions are available on the website.
CoolerSave universal Controller
Interested?
Buy the CoolerSave by mail order or online by using our buy now buttons below!
CoolerSave Maxi = price on application as installation costs will vary.
|
Buy the 'CoolerSave 1.0' for £110.00 |
|
Buy the 'CoolerSave 3.0' for £250.00 |
|
All prices are subject to VAT
P&P £7.75
Downloads
Personal, non-commercial use
You may download, reformat, and print a limited amount of Original Equipment Limited’s content for your personal, noncommercial use and for use. You may also include excerpts or limited portions of Original Equipment Limited’s information in printed memos, reports, and presentations. We ask only that you attribute this information to us by including "Used with permission from Original Equipment Limited, Copyright 200_. All rights reserved."
